Lack of energy

Often the problem can be that there is a lack of power or a problem in the outlet where your device is connected. So, try plugging some other device into the same outlet as your air, if it works, the problem is with your device itself.

Plugged in

It may sound like bullshit, but often the air conditioner will not turn on because it’s unplugged from the wall outlet. So take a peek to see if it’s on the right way.

Remote Control

If you tried to connect through the remote control, make sure the problem is not with it, sometimes it may be just without a battery. Try turning on your device without the control, if it is not possible, put new batteries in the control and try again. If none of these tests work makes sure the problem is not one of the others listed here. Check here if you want to know more about air conditioning control. In order to know more about Air conditioning repairs Geelong, you can always take the help of the internet.

Circuit breaker

If there is a power failure, the circuit breaker may end up disarming and not returning to the starting position. So take a look at the breaker in your home before calling the technician.

Importance of checking the fuse

If none of these causes are mentioned above, the problem may be the fuse. So make sure it does not burn, otherwise it will need to be replaced. If the problem of your device is none of the above, please contact a qualified technician and request a visit. To prevent these and other problems from happening with your air conditioner, take a look at these air conditioning maintenance tips. If you have a hot and cold air conditioning, it is certainly because you want to have fresh air in the summer and warm in the winter. But when after a long time without using the warming function it does not work, what do you do? Rest assured that people facilitate and show why their air conditioning does not heat up and helps solve this little problem, take a look.

Unplug from outlet

If the hot air is not coming out, be sure to unplug the power cord for 15 minutes then reconnect. Sometimes your device just needs a little rest.

Inadequate power

Deceive those who think that by choosing a lower power the air conditioner will work the way you want and you will still save on the light bill. The power in BTUs serves to ensure optimal cooling and also the correct heating. That is, if the power is low for a large environment, the heating will be insufficient. Then, when choosing your device, check the optimal power for each environment.

Bad installation

Just installed the hot and cold air conditioning and it does not heat up? It may be that the installation was done incorrectly. Problems such as the distances between internal and external unit, pipe path, etc., can impact the operation of the air conditioning. Call the technician who installed your air conditioner to see if this is the case if the unit does not heat up.

Climate conditions

It is important to always select the temperature according to the external climate. The apparatus can reach up to 32 ° C, but for the result to be efficient, it is important that the outside temperature is between 17 ° C and 24 ° C.

Comments are closed.